Cylinder Accessories
Transfer Hoses
Transfer hoses are constructed of a flexible stainless steel suitable for the transfer of cryogenic fluids and are available in 4 ft. (1.2 m) or 6 ft. (1.8 m) lengths. Hoses are fitted with a 3/8 in. NPT male fitting on one end and a CGA female fitting on the other end.
| Female End Fitting | Hose Length | Male End Fitting | Part Number |
| Nitrogen and Argon LIQUID and VENT Connection | |||
|
CGA 295 |
4 ft. (1.2 m) 6 ft. (1.8 m) |
3/8 in. NPT 3/8 in. NPT |
1700-9C65 1600-9C66 |
| Nitrogen and Argon USE Connection | |||
| CGA 580 | 6 ft. (1.8 m) | 3/8 in. NPT | GL50-8C51 |
| Oxygen LIQUID or VENT Connection | |||
| CGA 440 | 6 ft. (1.8 m) | 3/8 in. NPT | GL50-8C53 |
| Oxygen USE Connection | |||
| CGA 540 | 6 ft. (1.8 m) | 3/8 in. NPT | GL50-8C56 |
| Carbon Dioxide LIQUID or VENT Connection | |||
| CGA 320 | 6 ft. (1.8 m) | 3/8 in. NPT | HP50-8C51 |
| Carbon Dioxide Gas VENT Connection | |||
| CGA 295 CGA 295 |
4 ft. (1.2 m) 6 ft. (1.8 m |
3/8 in. NPT 3/8 in. NPT |
1700-9C65 1600-9C66 |
Cryogenic Phase Separators
Designed to minimize hazardous splashing and vaporization, phase separators are available in three different sizes to accommodate transferring liquids into various open containers. The two larger phase separators are designed to fit 3/8 in. NPT end of Taylor-Wharton transfer hose. Specify quantity and size or part number.
- Part Number 1193-8C80
2 3/4 in. x 1 3/8 in. OD (3/8 in. NPT) (70 mm x 35 mm)
- Part Number 1193-8C82
1 1/4 in. x 1 in. OD (3/8 in. NPT) (32 mm x 35 mm)
- Part Number 1193-8C83
1 1/4 in. x 1/2 OD (1/8 in. NPT) (32 mm x 12.7 mm)
External Heat Exchanger
An External Heat Exchanger (vaporizer) effectively increases the gaseous delivery rate of any liquid cylinder by approximately 250 cfh (7.0 cu. m/h) air gases and 120 cfh (3.4 cu. m/h) CO2 continuous at pressures up to 500 psig (34 bar/3447 kPa). The vaporizer is cleaned for oxygen service and comes equipped with a 3/8 in NPT fitting to connect to a transfer hose and regulator suited to your application. Dimensions - 12" x 15 3/4" x 46"
- Part Number VP50-7C10
External Heat Exchanger
View Literature/Specifications
To view specifications, you must install Adobe Reader.
